HOW A CAR WORKS

By -


Span3 how the braking system works 1 1

How the braking system works

in Basics
Dual-circuit braking system A typical dual-circuit braking system in which each circuit acts on both front wheels and one-rear wheel....
Span3 how the charging system works 6

How the charging system works

in Basics
An alternator Inside an alternator the belt-driven rotor becomes an electromagnet when current is fed to it. As the rotor...
Span3 how the starting system works 9

How the starting system works

in Basics
Inertia system An inertia type starter: this one is an 'inboard' type in which the Bendix gear throws the pinion...
Span3 how the cooling system works 12

How an engine cooling system works

in Basics
How the coolant circulates A typical water-cooling system with an engine-driven fan: note the bypass hose taking off hot coolant...
Span3 how the heating and ventilation systems work 14

How car heating and ventilation systems work

in Basics
A typical car heating system A modern car has a ventilation system that provides a constant through-flow of fresh air,...
Span3 the engine 17

The engine

in Basics
Different engine layouts The simplest and most common type of engine comprises four vertical cylinders close together in a row....
CLINK ON THE BELOW LINK TO EXPLORE MORE ABOUT CARS:
http://www.howacarworks.com/

Myself is Rahul Mishra working as an senior engineer in manufacturing industry. I have completed my engineering from amity university in year 2017. I love blogging and interacting with new peoples. The main purpose of the blog is to keep everyone updated with what latest is going one in the market regarding technology and other aspects.

Comments

Post a Comment

IS THE INFORMATION FOUND USEFUL

Popular posts from this blog

LATHE MACHINE

By -
Image
LATHE MACHINE The lathe is a machine tool which holds the work between two rigid supports called centres (live and dead) or in a chuck.  The lathe carries following main parts : Bed  Head stock Tail stock Carriage Feed mechanism Legs                              BED  The bed of the lathe acts as a base on which fixed and operating parts of the lathe are mounted. This facilitates the correct relative location of the fixed parts and controlled movement of the operating parts. The vibrations while the machine should be less as possible for accuracy due to this reason the bed is made up of grey cast iron. HEAD STOCK The head stock is the part of lathe serves as housing for pulley and backgears, provides bearing for the machine spindle. It consist of following main parts : Cone pulley Backgears and backgear lever Head stock spindle Live centre...
Read more